Fast Response Steps When You Find Asbestos Near You
In asbestos emergency repair, some guidelines can be used to keep the level of asbestos exposure to the lowest. A storm damage in a workplace, especially when it involves an asbestos material on the scene, needs a fast response of emergency repair. What should be done when the situation occurs?
1. Stop work
When a storm strikes, keep in mind to cease all kinds of activities in the area as the storm may release some asbestos fibers into the air.
2. Restrict the access to the site
Make a restriction to the suspected polluted area can be done by locking every entry door and put warning signs in vital areas to prevent any workers entering the premises and risking themselves to asbestos exposures. Do not forget to turn off any air handling system to prevent a wider area of exposure.
3. Notify the site authorities.
Never try to upset anything on the wrecked site. Contact the authorities, for example, the facilities management or the security staff and notify the situation ASAP.
4. Let the information of the incident flows
Other members of the workplace need to be notified in addition about the situation. Those who are responsible for the maintenance, especially concerning asbestos material, should be the priority of the information flow. The more people know about the incident, more people will be able to prevent the others from entering the damaged site and risking their lives from being exposed to asbestos fibers.
Nevertheless, the maintenance manager will have the responsibility to do the next step.
5. Inform the asbestos consultant
This step is needed to get a risk assessment and the right management plan as soon as possible.
6. Site visits
The asbestos consultant will then come to the polluted area to check on the suspected material. Sample-collecting can also be conducted if necessary. When the sample taken has a positive consequence, notify the asbestos material management coordinator and continue to the next step (point 7). The sample consequence is negative, inform the asbestos material management coordinator, and continue to point 9.
7. Contact a licensed asbestos contractor for cleanup course of action
The coordinator of asbestos material management takes in a licensed contractor to do the cleanup. This course of action is conducted in join with the asbestos consultant.
8. Air monitoring
This course of action is done in the polluted area to make sure that the level of the dust is nevertheless permissible based on the exposure level. A physical inspection is also conducted after the removal course of action, to confirm that the removal has reached a standard procedure.
The step is taken to guarantee the safety of unprotected workers who go into the site. When completed, the asbestos consultant releases a document of clearance.
All staff who manager the decontamination course of action position a meeting to estimate the asbestos management plan.
10. Update the asbestos register
Any changes on asbestos containing materials in the area should be put into the asbestos register.
As a part of sharing the knowledge of safety gear and procedures that should be conducted, it would be wise that not only a specialized can understand the steps of emergency procedures. However, it is highly recommended to use an experienced and licensed specialized to do the work.
In the event you live or work inside a character that you simply know may include asbestos-containing material (ACM), it’s recommended you invest in an ‘Asbestos Emergency Personal Protection Kit.’
This kit must be make up of consistently asbestos rated disposable:
- P2 confront disguise
- complete body suit
- Boot covers
- Latex gloves
- Leather gloves – large sufficient to fit over latex gloves
You also need to have on hand:
- Plastic spray bottle
- Duct tape x 4 rolls
- A roll of heavy duty builder’s plastic (approx. 3 x 20 meters).
- Heavy duty garbage bags.
- Paint, PVC glue or silicon sealant.
If you accidentally break ACM, like interior or exterior flat sheet, asbestos containing sheet (ACS), or asbestos containing corrugated sheet (ACCS), probably an basic factor would be to cut the spread of asbestos fibers/dust.
It’s the Foundation’s belief you need only to deal with ACM in an emergency circumstance, to create small amounts of broken ACM obtain.
Before commencing, you need to fit and put on your ‘Emergency Asbestos Personal Protective Kit’:
- P2 confront disguise
- complete body coverall suit [Note: When the cuffs are loose fitting wrap duct tape around them]
- Boot covers
- Latex and leather gloves.
immediately wet down the impacted broken vicinity and wipe any dust or visible residue off with wet mop, place the wet mop in a heavy duty garbage bag and double the bag. Seal any exposed broken edges of the ACM with paint, PVC glue or silicon kind sealant – this will ensure the asbestos fibers will not leach out from the ACM. Double wrap any broken pieces of ACM in heavy plastic sheeting and disposal of at your nearest empowered ‘asbestos’ disposal facility – Do not BIN – or else get in touch with a licensed asbestos removalist.
Carefully take away your ‘Emergency Asbestos Personal Safety Equipment’, keeping the confront cover and latex gloves to last and place all tools in doubled up heavy duty garbage bags, tie each bag closed employing duct tape and safely disposed of it. Never use a strength tool or vacuum cleaner to clean up or work on ACMs.
Better in addition, please try to read about things to do and things that must not do with asbestos. A better understanding of how to work around asbestos can continue a low level or already a zero level of exposure from the deadly fibers.