Re-Placement Windows – Little Known Facts About Heat Mirror
The choice of the right glazing is one of the most important and meaningful decisions that an architect or building owner will make. This decision impacts the overall design, human comfort, energy efficiency, mechanical HVAC design and loads, day lighting, condensation control, ultraviolet fading and sound control. In the design of any building (whether it be residential, commercial or industrial) one must look at and take into consideration the six principal glazing design challenges. These are:
o Winter Comfort and Heating Load
o Summer Comfort Cooling Load
o Natural Day lighting
o turn up and Reflectivity
o Ultraviolet Fading Control
o Condensation Control
The Heat Mirror(TM) family of wavelength-selective products offer the solution to all glazing design challenges such as climate, elevation and application. These solutions provide unparalleled flexibility to “tune” a building to meet these needs. As more and more architects, builders and homeowners adopt Southwall’s technology buildings will move from part of the environmental problem to part of its solution.
Heat Mirror(TM) is a low-emissivity coated film product suspended inside an insulating glass unit. The consequence is a triple unit with two airspace’s without the weight of triple insulating glass and with far superior insulating and shading performance. The Window Man offers two types of Heat Mirror(TM), they are: HM 88 and HM 66. These range from the low reflectance, high-light transmittance performance of Heat Mirror 88 by the shading performance of Heat Mirror 66.
All Heat Mirror products can be used with virtually any kind of glass – clear, heat absorbing, reflective, heat-strengthened, tempered, laminated – to unprotected to superior performance in a wide range of aesthetics.
Heat Mirror insulating glass is obtainable with a variety of clear coatings for mastering the sun’s heat. From Heat Mirror 66 to Heat Mirror 88, solar heat gain is properly controlled, and offers you energy efficiency with relation to HVAC costs and provides the following benefits..
already when outside temperatures are very low, Heat Mirror keeps
the interior glass temperature close to the room temperature,
reducing drafts and chilly spots near windows.
Heat Mirror resists wintertime condensation at exterior temperatures
up to 45 degrees colder than traditional insulating glass, a
particularly important assistance for pool and spa enclosures,
computer rooms, and other high-humidity environments.
Reduced Fabric Fading
Heat Mirror insulating glass blocks 99.5% of the sun’s ultraviolet
(UV) radiation, helping reduce damage to valuable furnishings
and merchandise from fading and decline. Laboratory
studies indicate that fiber behind clear Heat Mirror glazing
resist fading and retain their original color up to three times
longer than fiber behind clear single pane glass.
In noisy environments, Heat Mirror’s rare construction
insulates against unwanted sound transmission better than
ordinary double-pane windows. Heat Mirror can be used with
laminated glass on the inboard and/or outboard light for maximum
After 14 years in the re-placement window business, I have found that most people have very little or no knowledge of the availability of other window products than those having low E and Argon filled glass. Most windows are replaced with the dominant interest being that of energy efficiency and lowering heating and cooling cost.
I suggest taking the time to check out several suppliers and the R and U values of the windows products they offer as this will assistance you in the long run in making the right decision.
The two products that I have sold over the years are Traco and Kensington, they both have websites having a lot of information about their products.
More information about Heat Mirror(TM) can be found at http://southwall.com/.